Econ™ 80 Size:Trial Kit (1.9 lbs. / 0.86 kg.) solvents (intermittent contact) and can

solvents (intermittent contact) and can be primed/painted or bonded to other surfaces (any release agent must be removed) using Urebond or similar flexible adhesive

Use a release agent made specifically for mold making (Universal™ Mold Release or Mann’s Ease Release™ 200 available from Smooth-On or your Smooth-On distributor)

Mold Max™ 29NV does not require vacuum degassing

The convex side is great for compressing clay and knocking out the air bubbles

a comparative measurement chart for horses

Econ™ 80 Size:Trial Kit (1.9 lbs. / 0.86 kg.) solvents (intermittent contact) and canEcon 80 is an economical Shore 80A urethane rubber suitable for a variety of mold making and industrial applications. It is a lower cost, faster cure alternative to our popular PMC 780. Physical properties are lower vs. PMC 780. This is a no odor system that features a 1A: 1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight. Econ 80 is